Honeywell CIPer 30 Installation And Operation Manual Download Page 12

Page: 12 / 41

CIPer

MODEL 30 CONTROLLER - INSTALLATION AND OPERATIONS GUIDE

31-00206 - 02

Install WEBStation-N4.10.0.154

Download and install WEBStation-N4.10.0.154 on your system.

Procedure to Upgrade CIPer Model 30 Controller and Expansion IO

Procedure 1: Distribution File Installer

Following are the dist files required to upgrade CIPer Model 30 controller and Expansion IO using the
Distribution File installer:

Files required for Distribution File Installer
Tools

File Name

Version

WEB-O3022H Firmware

honeywell-IPCSIO.dist

1.1.0.76

WEB-O9056H Firmware

honeywell-IPCIO.dist

1.1.0.140

Baseboard Firmware

honeywell-IPCBASE.dist

1.1.1.146

OS QNX

honeywell-IPCQNX.dist

7.0.4.4

JRE

honeywell-azul-ejre-ipcqnx-arm.dist

1.8.0.282

IPC Tools

honeywell-IPC-tool.dist

4.10.0.1.1.257

IPC Module

honeywell-IPC-module.dist

4.10.0.154

Niagara Core Software

nre-core-honeywell-IPCQNX-arm.dist

4.10.0.154.4

Niagara Config Software

nre-config-honeywell-IPC.dist

4.10.0.154.6

NOTE

Factory Reset Image

•

The

honeywell-IPC-factory.dist

file can be used to reset the CIPer Model 30 Controller to

factory settings. To install the

honeywell-IPC-factory.dist

file, use Distribution file installer.

•

The factory reset image should only be installed after the upgrade process has been verified
successfully.

•

At this time, installing the Factory reset is not possible with Commissioning Service and
Provisioning service

NOTE

Honeywell Buildings Forum access requires a valid login to download the software.

NOTE

•

For upgrading all components in a single installation use

nre-config-honeywell-

IPC.dist

file. This file installs all of the individual components of CIPer Model 30 core

files, baseboard firmware, expansion IO firmware, and CIPer Model 30 modules.

Summary of Contents for CIPer 30









































Search results

Summary of Contents for CIPer 30

Reviews:

Honeywell CIPer 30, Installation And Operation Manual, Page: 12 / 41

Search results

Summary of Contents for CIPer 30

Reviews: