manualshive.com logo in svg

Honeywell CHRONOTHERM IV T8665A, User Manual

Share
Download
Honeywell CHRONOTHERM IV T8665A User Manual Download Page 14

14

69-1536–3

Setting the System Key

Press the System key until the desired

system (Heat, Off, Cool, or Auto) displays.

Heat: The thermostat controls the heating.

Off: Both the heating and cooling are off.

Cool: The thermostat controls the cooling.

Auto: The thermostat automatically changes

between heating and cooling operation,

depending on the indoor temperature.

Thermostat will satisfy system demand

on a first call basis. For example, if

zone 2 (any zone) is calling for heating

and then zone 1 (any zone) asks for

cool – the system will satisfy zone 2

before turning on the cool for zone 1.

System

Setting the Fan Key

Press Fan key until the desired mode

(On or Auto) displays:

On: Fan operates continuously.

Auto: Fan operates only when heating

or cooling.

   displays when the thermostat is

calling for the fan in this zone.

NOTE: The thermostat may delay

turning on the fan until another zone

has completed its call for heat or cool

before initiating the fan call for this zone.

Fan

ZONING

ZONING

Summary of Contents for CHRONOTHERM IV T8665A

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands