manualshive.com logo in svg

Honeywell Chronotherm III, Owner'S Manual, Page: 45 / 57

Share
Download
Honeywell Chronotherm III Owner'S Manual Download Page 45

IF…

THEN…

Display will not come on.

■

Check that heat or cool system power is on. If you use batteries, replace
with fresh ones.

■

Make sure thermostat is correctly mounted on the subbase.

Display flashes during programming.

■

You have reached the temperature setting limit. The setting range is 45

°

F to 88

°

 F. In models with automatic heat-cool changeover, the COOL

temperature setting must be at least 3

°

 F above the HEAT temperature

setting.

Display flashes during operation.

■

Programming has been lost because of a power outage. You must
reprogram.

Program is lost due to power outage.

■

Check that backup batteries are installed correctly. Replace when
necessary. Reprogram the thermostat.

Temperature change occurs at the

■

Check the program times for the period in question. Be sure that AM

wrong times.

and PM indications are correct. Make sure the current day and time are
correct. Reprogram when necessary.

■

Remember that the heating system or cooling system comes on 

before

the WAKE and RETURN start times so the house will be at the desired
temperature when the period starts.

TROUBLESHOOTING GUIDE

39

Summary of Contents for Chronotherm III


























































Reviews:

No comments