Honeywell CF3680, User Manual, Page: 56 / 203

40 N3680 Decoded Engine User Guide
Scan Presentation Centering On , then scan one of the following bar codes to
change the top, bottom, left, or right of the centering window. Then scan the per-
cent you want to shift the centering window using digits on the inside back cover of
this manual. Scan
Save . Default Presentation Centering = 40% for Top and Left,
60% for Bottom and Right.
Note: IIf you are taking images (see Imaging Commands beginning on page 7-125), you
must set the In-Stand Sensor to Off .
You may program a Streaming Presentation Mode (Normal, Enhanced, or Mobile
Phone) you wish to use for in-stand scanning, and a Manual Trigger mode (Nor-
mal, Enhanced, or Mobile Phone) you wish to use for out-of-stand scanning. To do
this, you must first scan the preferred Streaming Presentation mode (see below),
then scan the Manual Trigger mode (see
page 34 and page 41 ) you want to use.
Presentation Centering On
* Presentation Centering Off
Top of Presentation
Centering Window
Bottom of Presentation
Centering Window
Left of
Presentation Centering
Window
Right of Presentation
Centering Window