8
2.
Using a plastic pry tool, insert the tool into the seam on the
top of the device and pry open the housing.
3.
Continue around the top and down the side of the housing
with the pry tool, releasing the clips.
4.
Once one side of the housing is open, pull the housing apart
with your hands. You will need to use some force.
5.
Place the iPhone into the sled and press the top and bottom
housings together. Press strongly around the housing
edges to clip the top and bottom together.
6.
Tighten the four screws (torque: 2kgf.cm/1.73lbf.in). Do not
over tighten the screws.
