C7355B IN-DUCT IAQ MONITOR
31-00440—01
8
2.
Remove the two terminal blocks for power supply
and RS-485 respectively.
Fig. 22.
NOTE:
The left terminal is the power terminal block. The
right terminal is the RS-485 terminal block.
3.
Run the power cable and RS-485 cable through each
waterproof connector as shown in Fig. 23.
Fig. 23.
4.
Connect the cables to the terminal blocks.
Fig. 24.
5.
Plug the terminal blocks back onto the pin connec-
tors and tighten the waterproof connectors.
Fig. 25.
