Honeywell BENDIX/KING KTR 2280 System Installation Manual Download Page 33

Page: 33 / 74

KTR 2280 Preliminary H 08/17/06

Rev. 0, Aug/2006

©Honeywell International Inc. Do not print without express permission of Honeywell

Page 2-11

2.3.5.4 CRIMP TOOL INFORMATION

The following is a listing of crimp tools and accessories for use with the KTR 2280.

* All source tools and positioners are to Mil-Spec Standard and are interchangeable.

** Positioner wire gauge (AWG) refers to barrel only.

*** SUPERCEDES MIL SPEC P/N M24308/18-1. ORDER FROM POSITRONICS, DANIELS, OR ASTRO

BY MIL SPEC P/N.

NOTE: Selections in parentheses denote optional ordering number from source.

Vendor Ordering Information:

Astro Tool Company

21615 SW TV Hwy, Beaverton, OR 97006

(503) 642-9853 * Fax: 503-591-7766 * Email: [email protected]

Daniels Manufacturing Company (DMC)

526 Thorpe Road, Orlando, FL 32824-8133 USA

Tel: 407-855-6161 * Fax: 407-855-6884 * Email: [email protected]

Positronics Industries, Inc.

423 N. Campbell Ave P.O. Box 8247, Springfield, MO 65801

Tel: 800-641-4054 * Fax: 417-866-4115 * Email: [email protected]

TABLE 2-4 SIZE 22 HIGH DENSITY D-SUB CONTACT TOOLS

SOURCE *

CRIMP TOOL

POSITIONER 22-30 AWG ** INSERTION/EXTRACTION TOOL

HONEYWELL

005-02012-0034

Not Available

MIL-SPEC

M22520/2-01

M22520/2-06

M81969/1-04 ***

DANIELS MFG.

AFM8 (M22520/2-01)

K41 (M22520/2-06)

POSITRONICS

9507-0-0

9502-3 (K41)

ASTRO (BUCHANAN)

615717 (M22520/2-01) 615722 (M22520/2-06)

Summary of Contents for BENDIX/KING KTR 2280











































































Search results

Summary of Contents for BENDIX/KING KTR 2280

Reviews:

Honeywell BENDIX/KING KTR 2280, System Installation Manual, Page: 33 / 74

Search results

Summary of Contents for BENDIX/KING KTR 2280

Reviews: