Compliance Information
FCC Safety Compliance
The equipment meets by the test proof the restriction of the relevant B series digital device of
Article 15, FCC regulations. The design purpose of these restriction is to provide reasonable
protection for daily life at home against the environmental harmful interference. The equipment
will generate harmful interference to the radio communications if it is not installed according to
the instructions. However, we also can’t promise that no interference situation will take place
even after a specific installation mode. We encourage the user to try the following one or mul
-
tiple methods to reduce the interference if the equipment really results in harmful interference
to PA or TV reception (you may sense through the equipment):
- Change the direction or the location of the receiving antenna.
- Increase the distance between the equipment and the receiving antenna.
- Connect the equipment and the receiving antenna to different socket.
- To ask the experienced PA / TV technical personnel for help.
Hint:
It is necessary for you to use the shielded signal cable and power cord provided with the
equipment if you want to meet the restriction of FCC B class computer devices. The “Federal
Communications Committee” warns that the user will lose the right of operating the equipment
toward the unauthorized variation of modification of the equipment without the definite approval
from the responsible authorization for the compliance.
Warning:
This is a FCC Class B product. The product may generate radio interference when being oper-
ated under normal environment. In this case, some protective measures should be taken by its
user.
- 2 -
