Honeywell Ademco VISTA-21iPSIA, Installation And Setup Manual

Page: 66 / 96

Programming IP/GSM Options via AlarmNet Direct Website
To program the IP/GSM options via the AlarmNet Direct website (if you are already signed up for this
service), go to: https://services.alarmnet.com/AlarmNetDirect/userlogin.aspx
If you are not signed up for this service, click on “Dealer Sign-Up.
Log in and follow the on-screen prompts.
Please have the following information available:
1.
Primary City ID (two-digit number)
2. Primary Central Station ID (two-digit hexadecimal number)
3. Primary Subscriber ID (four-digit number)
4. MAC ID and MAC CRC number (located on the outside of box and on label inside module) or MIN number
of the device you are replacing
5. Mode of operation of existing module if replacing a "C" series radio.
After programming is complete, you must transfer the data to the module and the module must be registered.
Refer to the Registration section for details.
IP/GSM Diagnostic Commands (
∗∗∗∗
29 Menu Mode)
Diagnostic commands can be used to quickly view your Internet and GSM connectivity settings and options.
For each command (except [
↓
] and [0]) press the [shift] key and then the designated command key. For
example, press [shift] then [1/A] to display the software revision screen.
To enter Diagnostic mode:
1. Press
∗
29 while in data field programming mode.
2. Enter “1” at the “Enable IP/GSM” prompt then press [
∗
].
3. Select “2” (Diag) at the next prompt.
4. Enter the desired command at the “Sel Key Command” prompt.
For subsequent commands, enter the next command at the currently displayed screen.
To exit Diagnostic mode, press ESC (shift-[A]).
Key Prompt Function
[A]
INTERNAL IP/GSM
x.x.xx mm/dd/yy
Software Revision
"x.x.xx" indicates the
installed software
Revision. Mm/dd/yy
indicates month, day and
year of the revision.
[B]
MAC xxxxxxxxxxxx
MAC CRC yyyy
MAC, SCID, IMEI
“xxxxxxxxxxxx” indicates
the IP/GSM’s unique
identification number.
Yyyy indicates the 4 digit
MAC CRC needed to enroll
the device in dealer direct.
[
∗
] to go to SCID.
SCID xxxxx xxxxx
xxxxx xxxxx
Only if GSM or IP/GSM
enabled. Displays the
identification number
assigned to the SIM card
(SCID) in this device.
[
∗
] to go to IMEI.
IMEI xxxxxxxx
Xxxxxx x
Only if GSM or IP/GSM
enabled. Displays the
identification number
assigned to the GSM
module in this device.
[
∗
] returns to MAC.
[C]
Mon 01 Jan 2006
05:48:39 am
Time
Retrieves the current date
and time from the
AlarmNet network in
Greenwich Mean Time
(GMT). This display
confirms that the module
is in sync with network.
Key Prompt Function
[D]
Physical Link
Good/Bad
Physical Link
Only if IP or IP/GSM
enabled. Indicates whether
the device has detected a
physical connection to the
internet. [
∗
] to continue to
NIC IP address.
NIC IP Address
xxx.xxx.xxx.xxx
IP Information Displays
Displays the IP address
assigned to this device.
[
∗
] to go to subnet mask.
Subnet Mask
xxx.xxx.xxx.xxx
Displays the 32-bit address
mask used to indicate the
portion (bits) of the IP
Address that is being used
for the subnet address.
[
∗
] to go to gateway IP.
Gateway IP Addr
xxx.xxx.xxx.xxx
Displays the IP Address
assigned to the Gateway.
[
∗
] to go to DNS server IP.
DNS Serv IP
xxx.xxx.xxx.xxx
Displays the IP Address
assigned to the DNS
(Domain Name System)
server.
[
∗
] to go to encryption test.
Encryption Test
AES Passed!
Performs a self-test of the
AES encryption algorithm.
[
∗
] to go to DHCP.
DHCP
OK
DHCP (Dynamic Host
Configuration Protocol)
indicates server is okay.
[
∗
] returns to Physical Link
prompt.
Installation and Setup Guide
5-24