background image

 

 
 
 
 
 
 
 
 
 
 
 
 

WARRANTY INFORMATION 

For the latest warranty information, please go to: 

www.honeywell.com/security/hsc/resources/wa

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

2 Corporate Center Drive, Suite 100 

P.O. Box 9040, Melville, NY 11747

 

Copyright © 2004 Honeywell International Inc. 

 

www.honeywell.com/security 

 

 

 

ÊK0344V2JŠ 

K0344V2  1/15  Rev. B 

Summary of Contents for ADEMCO 5800RP

Page 1: ... base before mounting For surface wiring entry a thin breakaway area is provided along the base s right edge 2 Mount the module in the selected location For greatest security use all four mounting holes two keyslot holes and two round holes in the plastic base 3 Install each antenna in the respective right hand terminal of the two terminal blocks at the upper edge of the 5800RP s circuit board and...

Page 2: ...is present PROGRAMMING AND OPERATIONAL NOTES Programming for Combined Trouble Reporting Check in low battery AC loss and RF jam messages all report on one zone 1 Set DIP switch 2 to OFF keep switch 2 in the OFF position when enrolling is complete 2 Assign the 5800RP to a zone for sending check in low battery AC loss and RF jam messages and enroll its serial number When prompted toggle the tamper s...

Page 3: ...d the user s authority to operate the equipment CLASS B DIGITAL DEVICE STATEMENT This equipment has been tested to FCC requirements and has been found acceptable for use The FCC requires the following statement for your information This equipment generates and uses radio frequency energy and if not installed and used properly that is in strict accordance with the manufacturer s instructions may ca...

Page 4: ...ranty information please go to www honeywell com security hsc resources wa 2 Corporate Center Drive Suite 100 P O Box 9040 Melville NY 11747 Copyright 2004 Honeywell International Inc www honeywell com security ÊK0344V2JŠ K0344V2 1 15 Rev B ...

Reviews: