3 - 1
3
Setting up the WLAN SWC with DeviceConfig
Overview
You can use the DeviceConfig Power Tool to configure the SWC. Simply configure the DeviceConfig.exm
file with the SWC’s settings, save it to the
\IPSM\Autoinstall
folder and cold boot the Dolphin terminal.
When you enable the WiFi radio, the SWC will connect according to the settings in the DeviceCon-
fig.exm file.
Configuring the DeviceConfig.exm File
On your workstation or your terminal, open the DeviceConfig.exm file in EZConfig. The following instruc-
tions show the workstation method.
1.
Click
Start
>
All Programs
>
Honeywell
>
Dolphin Power Tools and Demos
>
EZConfig Editor
.
2.
Tap the
Open
icon
and select the DeviceConfig.exm file.
3.
Right-click and select
Enable
on the following sections:
Radio Manager
>
WiFi
>
Security
>
Supplicant
>
Profile 1
.
The WiFi section is disabled by default. Enabling this section turns the 802.x radio on at startup.
4.
Select the
Profile 1
section.
Summary of Contents for 7850LP-I1-5210E - Hand Held Products Dolphin 7850
Page 22: ...1 18 ...
Page 28: ...3 4 ...
Page 33: ...4 5 DEBUG off Enables debug mode ...
Page 34: ...4 6 ...
