S
CANNER
O
PERATION
Audible Indicators
When the 7120 is in operation, it provides audible feedback to indicate the status
of the scanner. Eight settings are available for the tone of the beep (normal, six
alternate tones and no tone). For instructions on how to change the tone of the
beeper, refer to the MetroSelect Configuration Guide (00-02407).
One
Beep
When the scanner
first
receives power the blue and white LED will toggle on
and off. The scanner will beep once, then the LEDs will stop toggling and the
blue LED will remain on to indicate the scanner is ready to scan.
When the scanner
successfully
reads a bar code, the white LED will flash and
the scanner will emit a beep*. If the scanner does not beep once and the white
light does not flash, then the bar code has
not
been successfully read.
Razzberry Tone
This is a failure indicator. Refer to
Failure Mode Indicators
on page 14.
When in
configuration mode
, a razzberry tone indicates that an invalid bar code
has been scanned.
Three Beeps
- During Operation
When
entering configuration mode
†
the scanner will beep three times and the
white and blue LED will start to toggle on and off. The blue LED and the white
LED will toggle on and off until the scanner exits the configuration mode.
Upon
exiting
configuration mode
†
, the white LED will flash three times and the
scanner will beep three times. The blue LED will then stay on indicating the
scanner is ready to scan.
When using
one-code-configuring
, the scanner will emit a unique beep three
times after scanning. This indicates that the
single
configuration bar code has
successfully
configured the scanner.
Three beeps* can also indicate a communications timeout during normal
scanning mode.
Three Beeps
- On Power Up
This is a failure indicator. Refer to
Failure Mode Indicators
on page 14.
* This feature is configuration dependent. Refer to the MetroSelect Configuration Guide
to enable this feature.
†
Refer to the Multi-Code Configuration Method in the MetroSelect Configuration Guide.
12
Summary of Contents for 7120 Orbit
Page 1: ...7120 Orbit Presentation Laser Scanner User s Guide ...
Page 41: ......
Page 42: ......
Page 43: ......