Honeywell 60 Series, Configuration Manual

Page: 42 / 93

Honeywell 60 Series IP Camera Software Configuration Guide
28
Figure 4-9 Exposure
Measurement Window
Measurement Window
: This function allows users to set measurement window(s) for low light
compensation. For example, where low-light objects are posed against an extremely bright
background. You may want to exclude the bright sunlight shining through a building's
corridor.
•
Full view: Calculate the full range of view and offer appropriate light compensation.
•
Custom: Manually add customized windows as inclusive or exclusive regions. A total of 10
windows can be configured.
The inclusive windows have a higher priority. You can overlap these windows, and, if you
place an exclusive window within a larger inclusive window, the exclusive part of the
overlapped windows will be deducted from the inclusive window. An exposure value will
then be calculated out of the remaining of the inclusive window.
•
Center: This option will automatically add an inclusive window in the middle of the window
and give the necessary light compensation.
•
HLC (Highlight Compensation): Firmware detects strong light sources and compensates
on affected spots to enhance the overall image quality. For example, the HLC helps
reduce the glares produced by spotlights or headlights.
Exposure Control
Exposure level : You can manually set the Exposure level, which ranges from -2.0 to +2.0 (dark
to bright) (for IPC model).
Exposure mode : Select an exposure mode ( Auto or Manual ) from the dropdown list.
•
If you select Auto , you can set the Iris mode to Outdoor or Indoor .
•
If you select Manual , you can drag the slider of Iris adjustment, Exposure time and Gain
Control to get the best image quality.
Flickerless : Check to reduce flicker in the image.