Honeywell 5110XM User Manual Download Page 24

 

 
 

LIMITED WARRANTY 

Honeywell International Inc., acting through its Security & Communications business ("Seller"), 2 Corporate Center 
Drive, Melville, NY, 11747, warrants its product(s) to be in conformance with its own plans and specifications and to 
be free from defects in materials and workmanship under normal use and service for 24 months from the date stamp 
control on the product(s) or, for product(s) not having a manufacturer’s date stamp, for 12 months from date of 
original purchase unless the installation instructions or catalog sets forth a shorter period, in which case the shorter 
period shall apply. Seller's obligation shall be limited to repairing or replacing, at its option, free of charge for 
materials or labor, any product(s) which is proved not in compliance with Seller's specifications or proves defective 
in materials or workmanship under normal use and service. Seller shall have no obligation under this Limited 
Warranty or otherwise if the product(s) is altered or improperly repaired or serviced by anyone other than 
Honeywell factory service. Connection of any device(s) to a communicating bus of a Honeywell security system (e.g., 
keypad bus, polling loop) other than those manufactured or approved by Honeywell shall void this warranty.  For 
warranty service, return product(s) transportation prepaid, to your local authorized Honeywell representative. 

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, OF MERCHANTABILITY, OR FITNESS FOR A 
PARTICULAR PURPOSE OR OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE 
HEREOF. IN NO CASE SHALL SELLER BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR 
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, OR 
UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY 
THE SELLER'S OWN NEGLIGENCE OR FAULT. 

Seller does not represent that the product(s) it sells may not be compromised or circumvented; that the product(s) 
will prevent any personal injury or property loss by burglary, robbery, fire or otherwise; or that the product(s) will in 
all cases provide adequate warning or protection. Customer understands that a properly installed and maintained 
alarm system may only reduce the risk of a burglary, robbery, fire

,

 or other events occurring without providing an 

alarm, but it is not insurance or a guarantee that such will not occur or that there will be no personal injury or 
property loss as a result. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY PERSONAL 
INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON A CLAIM THAT THE PRODUCT(S) FAILED TO 
GIVE WARNING. HOWEVER,

 

IF

 

SELLER

 

IS

 

HELD

 

LIABLE,

 

WHETHER

 

DIRECTLY

 

OR

 

INDIRECTLY,

 

FOR

 

ANY

 

LOSS

 

OR

 

DAMAGE

 

ARISING

 

UNDER

 

THIS

 

LIMITED

 

WARRANTY

 

OR

 

OTHERWISE,

 

REGARDLESS

 

OF

 

CAUSE

 

OR

 

ORIGIN,

 

SELLER'S

 

MAXIMUM

 

LIABILITY

 

SHALL

 

NOT

 

IN

 

ANY

 

CASE

 

EXCEED

 

THE

 

PURCHASE

 

PRICE

 

OF

 

THE

 

PRODUCT(S),

 

WHICH

 

SHALL

 

BE

 

THE

 

COMPLETE

 

AND

 

EXCLUSIVE

 

REMEDY

 

AGAINST

 

SELLER. 

This warranty replaces any previous warranties and is the only warranty made by Seller on this product(s). No 
increase or alteration, written or verbal, of the obligations of this Limited Warranty is authorized.   

 
 
 
 
 
 

ÊN8028V2Š 

N8028V2  3/10  Rev A 

 

2 Corporate Center Drive, Suite 100 

P.O. Box 9040, Melville, NY  11747 

 

Copyright 

 2010 Honeywell 

International Inc. 

www.honeywell.com/security

 

 

Summary of Contents for 5110XM

























Reviews: