23
69-0939—1
(The setpoint temperature range is 40 to 90
°
F
(7 to 31
°
C) for heating and 45 to 99
°
F (9 to
37
°
C) for cooling.) Press
to switch to
your other system temperature setpoint.
NOTE: The program times are the same for
both heating and cooling.
Press
or
until the other desired
temperature setpoint is displayed. Press
,
or
and repeat the
above steps for programming the rest of the
day. The first day is now programmed.
IMPORTANT
Repeat all the above steps for each
day of the week that has a different
program than your first day. Refer
to Copying a Day section to copy
any program day to another.
Press
when all the days are
programmed.
Copying a Day
NOTE: Your thermostat must be in the
program mode to use the copy
feature.
Press
then
to select the day
to be copied if different from the day
displayed. Press
then
until
the day to be copied to is displayed. Press
.
NOTE: "donE" will be displayed for two
seconds and then the normal
program display will be shown.
Repeat the above steps for all the desired
days then press
.
Run
Program
Daytime
Evening
Night
Heat/Cool
Settings
Run
Program
Day
Day
Copy
Copy
Morning
