45
Honeywell 35 Series IP Cameras User Guide
Alarm Input
Alarm input
: Check the checkbox of Alarm input.
Name
: Enter the alarm input name.
Current mode
: Select the current mode from the drop-down list box.
Defence time
: Configure the schedule by using one of the methods below.
Click left mouse button to select any time point within 0:00-24:00 from Monday to
Sunday.
Hold down the left mouse button, drag and release mouse to select the schedule
within 0:00-24:00 from Monday to Sunday.
Output channel
: Select the Output channel.
Alarm record/SMTP
: Check the check boxes to enable Alarm record and SMTP.
PTZ linkage
: Check the check boxes to enable
PTZ linkage
.
After the event is triggered, the system will run or stop the movement of the
corresponding type according to the settings.
PTZ type
: Select
Preset
/
Scan
/
Patrol
/
Recording Patrol
.
Value
: Select the value.
Operate
: Select
Invoke
/
Pause
/
Continue
when PTZ type is
Patrol
.
－
Invoke
: Call related PTZ linkage for running
Patrol
.
－
Pause
: Pause related PTZ linkage
Patrol
.
－
Continue
: Continue related PTZ linkage running
Patrol
.
Note:
PTZ linkage function is only applicable for PTZ models HC35WZ2R25/HC35WZ5R30/
HC35WZ5R30W.
Alarm Output
Name
: Alarm output name
Current Signal
: Select
Grounded
or
Open
to define normal status for the alarm output.
Connect the output cable to an external device, the camera will report the current signal
output status according to alarm event setting.
Grounded
: Camera alarm relay is
Normal
Open
. It will turn to
Grounded/Closed
when an alarm event is generated to trigger it.
