Honeywell 301RW, User Manual, Page: 16 / 46

14 301R User Manual
511397
Honeywell
5/07
Wiring Details
System Configuration
System Configuration
DIP Switches
The DIP switches are used to change relay module addresses. If the
relay module is connected to a 301C controller, the addresses range
available begins at 81. If it is connected to a 201C, the range of
addresses begins at 1 or 17.
The wireless module (Coordinator PCB) uses Modbus communication
to transmit network information to the 301RW (PCB). A 301R, equipped
with a wireless module, uses addresses 81 and 82 (81 is the default
address) for communication between the wireless and relay modules.
PRODUCT ADDRESSES DIP SWITCH POSITIONS
VA201C VA301C Dip1 Dip2 Dip3 Dip4
1 or 17 81 Off Off Off Off
2 or 18 82 On Off Off Off
3 or 19 83 Off On Off Off
4 or 20 84 On On Off Off
5 or 21 85 Off Off On Off
6 or 22 86 On Off On Off
7 or 23 87 Off On On Off
8 or 24 88 On On On Off
9 or 25 89 Off Off Off On
10 or 26 90 On Off Off On
11 or 27 91 Off On Off On
12 or 28 92 On On Off On
13 or 29 93 Off Off On On
14 or 30 94 On Off On On
15 or 31 95 Off On On On
16 or 32 96 On On On On
SW1
23
4
1
O F F
R
O
CK
E
R
DO
W
N