4
SETUP & OPERATION
STEP 3: PROGRAM NEW USER CODES
1.
With the door open, press the
small black button (B) located
near the inside center of the door.
1.
2.
You will hear a musical chime and
the small green LED will glow.
NOTE: If the green LED stops
glowing, you need to press the
black button and start again.
2.
3.
Using the digital keypad, you now
have approximately 5 seconds to
begin entering a new personal
code using a minimum of 4 digits
to a maximum of 16 digits.
3.
4.
Once you have entered new code,
press ENTER key. You will hear a
chime indicating new code is now
programmed into memory.
4.
Before closing and locking the safe door, you should enter your new code to
confirm that it is correct and unlocks the safe.
For future reference, your new code should be recorded and placed in a secure
location away from the safe.
