T7500 - 2080WL
Dimensions
NOTE: All dimensions in mm unless stated otherwise.
Ordering Information
OS-No.: T750120
Setpoint
NOTE: All °C and °F-values approximate.
Please Note:
• To avoid stone deposit and corrosion the composition of the
medium should conform with VDI-Guideline 2035
• Additives have to be suitable for EPDM sealings
• System has to be flushed thoroughly before initial operation
with all valves fully open
• Any complaints or costs resulting from non-compliance with
above rules will not be accepted by Honeywell
• Please contact us if you should have any special require-
ments or needs
Fig. 1. 2080WL with remote sensor
Setpoint
2
3
4
5
6
7
°C
20
30
40
50
60
70
°F
68
86
104
122
140
158
Installation Examples
Accessories
Fig. 2. Control of air heater
Fig. 3. Mixer control for underfloor
heating
Fig. 4. For hot water storages and heat
exchangers
Theft-protection ring
with Allan screws
TA2080A001
with double-punch screws
TA2080A002
Screwdriver for double-punch screws
TA2080B002
Brass sensor pocket
R1/2"
TA2085A001
Sealing kit for installation 2080WL
R1/2"
TA2085B001
Special tool for assembly of thermostat
VA8210A001
Automation and Control Solutions
Honeywell GmbH
Hardhofweg
74821 Mosbach, Germany
Phone: +49 (6261) 810
Fax: +49 (6261) 81393
www.honeywell.com
Manufactured for and on behalf of the Environmental and Combustion
Controls Division of Honeywell Technologies Sàrl, Ecublens,
Route du Bois 37, Switzerland or by its Authorized Representative.
Dezember 2006
© 2006 Honeywell International Inc.
Subject to change • All rights reserved
EN0H-2005GE25 R1206
