Honeywell 1900GSR-2, User Manual

Page: 117 / 298

4 - 23
new symbols as long as the trigger is pulled. When this programming selection
is turned
Off , the scanner will only read the symbol closest to the aiming beam.
Default = Off.
No Read
With No Read turned On , the scanner notifies you if a code cannot be read. If
using an EZConfig Tool Scan Data Window (see page 10-3 ), an “NR” appears
when a code cannot be read. If No Read is turned Off , the “NR” will not appear.
Default = Off.
If you want a different notation than “NR,” for example, “Error,” or “Bad Code,”
you can edit the output message (see
Data Formatting beginning on page 6-1).
The hex code for the No Read symbol is 9C.
On
* Off
On
* Off