20 Operating Manual Touch operating module for MB/MB-Secure
3.
Important information on operation
The operating and display panel "Touch operating module" is used as a status display for operating
your intrusion detection central control unit. Operation of the system is dialog managed via a touch
screen. i.e. by touching the display with a finger the desired operating functions can be selected and
operated. The operating and display panel provides clear and comprehensive information on the
system status.
Operator guidance is only possible via the touch screen. If no entries are made during operation, the
display on the screen reverts to the basic state and the backlighting is deactivated after approx.
30 seconds (blanked). Touch the screen with the finger to reactivate the display illumination.
Set the visual angle of the display to obtain optimum legibility.
Do not operate the touch screen with sharp or rough objects (screen)!
3.1
Operator guidance
3.2
Visual angle
3.3
Cleaning and care
Before Cleaning please disable touchscreen (see
operating menu "More functions"). For Cleaning use
a damp, soft cloth. DO NOT use any other liquid,
sprays or ammonia-based cleansers.
Do not use abrasive or plastic decomposing liquids, e.g.
petrol, terpentine, thinner, etc. Aggressive cleaning agents
can damage or discolour the surfaces.
Do not use cleaners, e.g. scouring agents, scrub sponges.
Clean with a soft, moist cloth and clear water.
100°
