33-00066EFS—05
12
Initiating occupancy mode: commercial use
This feature keeps temperature at an
energy-saving level until you touch
Press
HERE
to Start Occupancy
. When you
arrive, touch the message to maintain a
comfortable temperature while the room is
occupied.
Touch the
s
or
t
buttons to set the
temperature or the Hold Until time. The
temperature is maintained until the time
you set. Temperature returns to an energy-
saving level after the timer expires, or the
“Occupied” period ends.
NOTE:
This feature is available only when
programmed by the installer.
M34127
Press
HERE
to
Start Occupancy
Adjusting humidification settings
1 Touch
MENU
and select
Humidification
.
2 Select
Auto
.
3 Touch
s
or
t
to select humidity level.
4 Touch
Done
to save your settings. Touch
Cancel
to ignore changes.
5 If frost or condensation appears on the
windows, touch
MENU
, then select
Window
Protection
. (Use a lower number to prevent frost
or condensation. Use a higher number if indoor
air is too dry.)
NOTE:
Window (frost) Protection is available
only if an outdoor air sensor is installed OR if
using the outdoor temperature from the Wi-Fi
connection to get local outdoor weather data
from the Internet.
NOTE:
The thermostat controls humidification
and dehumidification as needed to maintain
the desired humidity level. Depending on how
your thermostat was installed, the thermostat
may maintain a 15% separation between
humidification and dehumidification settings.
MCR34128
Humidification
Window Protection
MCR34129
Humidification
Off
Auto
MCR34100
Summary of Contents for VisionPRO 8000 Smart TH8321WF1001
Page 74: ...33 00066EFS 05 24...
Page 75: ...33 00066EFS 05 25...
