9
To adjust programme schedules
The Hot Water and Heating schedules must be programmed
independently, but the procedure is the same for both.
1 Move slider to
HOT WATER
or
HEATINg
, then press
+
or
-
to
adjust the “On” time for Period 1 as shown at left.
2 Press
OK
to save, then press
+
or
-
to adjust the “Off” time for
Period 1. Repeat for all time periods.
3 After all Monday time periods are set, press the
NEXT DAY
button to adjust settings for Tuesday. Repeat for all other days.
To stop programming at any time, move slider to
RUN
.
SHORTCUT:
While programming, press the
COPY DAY
button to
copy settings for the current day and apply them to other days. For
example, you can apply Monday settings to other days of the week.
After copying, press the
NEXT DAY
button to select a target day, then
press
OK
.
RUN
Set to
HOT WATER
or
HEATINg
6:30
AM
6:40
AM
8:30
AM
mon
tue wed thu fri sat sun
mon
tue wed thu fri sat sun
mon
tue wed thu fri sat sun
SET ON-TIME 1
ON-TIME 1 OK?
SET OFF-TIME 1
on 1
off 1
on 2
off 2
on 3
off 3
Press
+
or
-
to change time
Press
OK
TIP:
To delete an unwanted time period, set identical times for the
“On” and “Off” periods.