10
Lo
Batt
Set
Cool
77
M32763
On
M33586
Heat Off Cool
Auto On
Fan
Thermostat controls
Temperature
adjustment
Press the up or
down buttons
until you reach
the desired
temperature.
NOTE:
Make sure
the
SYSTEM
switch
is set to the system
you want to control
(Heat or Cool).
Fan Switch
is used to control your fan.
In “Auto” mode, the fan runs only when the
heating or cooling system is on.
If set to “On,” the fan runs continuously.
System Switch
is used to control
your heating or
cooling system.
•
Heat:
Heating
system control.
•
Off:
All systems
off.
•
Cool:
Cooling
system control.
Display screen
Low battery warning
(see page 11)
Setpoint indicator
Appears when the setpoint
temperature is displayed.
Temperature
The ambient (measured)
temperature is normally
displayed. To view the
setpoint temperature,
press the Up or Down
button once. The setpoint
temperature will appear
for five seconds.
System status
Cool on:
Cooling system is on.
Heat on:
Heating system is on.
When Cool On is flashing, compressor
protection is engaged (see page
