English
Installation Guide
1. REMARKS
This installation guide is intended for trained personnel and there-
fore does not include basic working steps.
ATTENTION!!!
· Changing the measuring insert: A seal or sticker must be at-
tached (between the housing and housing cover) for approval
reasons.
· The seal on the meter must not be damaged! A damaged seal
will result in immediate invalidation of the factory warranty and
calibration / conformity.
· Make sure you select the correct meter type, nominal load (qp)
and temperature and pressure range.
2. TRANSPORT, STORAGE AND OPERATION
· Water meters are precision devices and must be protected
against impact and vibration!
Meter with protection class IP 54
· The permissible storage and transport temperature is between
-20 °C and +55 °C.
· The water meter can be used for a water temperature of 5 °C
– 55 °C.
