Instructions
Honey-Can-Do 50L Sensor Trash Can
1) Open the battery cover, and insert 6 AA batteries (not included).
2) Turn on the power switch close to the battery cover, and the indicator will turn red for 3
seconds. When it starts to flash every 3 seconds, it means the motion sensor is working.
3) When you need to open the trash can, hover your hand 4-6 inches from the sensor. It
will close after 5 seconds of inactivity.
4) If you need to leave your trash can open for a longer period of time, simply press the
‘open’ button, and ‘close’ when you’re done.
AA x6
Battery Cover
Power Switch
Open
Close
Hold hand 4-6
inches from sensor
to open
Trash Bag Install
1) Open lid.
2) Pull out inner ring.
3) Place empty bag in empty can, twisting around the inner ring.
4) Place inner ring back into the can over the bag, and pull the bag taut from
inside the can to keep bag invisible from the outside.
