3
ASSEMBLY
1. Begin by identifying the top and bottom of pole support sections
(B & C)
see illustration above.
2. Next insert support pole connector (D) between support pole
sections and screw together. Repeat for all four support poles.
3. Screw lever feet (F) into the bottom of each pole (these are used to
adjust the shelf when on unlevel surfaces).
(preassembled on some models)
4. Finish by adding post cap (G) to the top of each pole.
(to stack
additional unit, remove cap (G) and add stacking connectors (H)
}
B
G
F
D
C
Note: The end with the
long space missinga rib
near the end is the bottom
support pole section.
Note: The end with the long
space missing a rib neat the
end is the bottom support pole
section.