3.
Adjust the drive chain.
4.
Install and tighten the rear axle nut.
Torque:
98 N·m (10.0 kgf·m, 72 lbf·ft).
5.
After installing the wheel, apply the brake
lever several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
6.
Install the parking brake caliper and
tighten the mounting bolts.
Torque:
31 N·m (3.2 kgf·m, 23 lbf·ft).
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the parking brake caliper.
NOTICE
When installing a caliper into original position,
carefully fit the brake disc between the pads to
avoid scratching them.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Tyre Puncture
u
Removing Wheels
Troubleshooting
139
Summary of Contents for X-ADV 750
Page 40: ...Operation Guide 37...