Honda WB20XT2, Manual

Page: 54 / 132

6-5
dummyhead dummyhead
WB20XT2•WB30XT2 FUEL SYSTEM
AIR CLEANER
REMOVAL/INSTALLATION
When removing air cleaner elbow, remove the engine (WB20XT2 only) (page 11-2).
CARBURETOR SPACER
INSTALLATION:
Before installing, check for damage.
Note the installation direction.
Viewed from air cleaner side
WING NUT
AIR CLEANER CAP
AIR CLEANER
ELEMENT
AIR CLEANER COVER
BREATHER TUBE
COLLAR
BOLT (6 x 20 mm)
AIR CLEANER ELBOW NUT (6 mm) (2)
AIR CLEANER GRID
REMOVAL/INSTALLATION:
Remove and install the air cleaner elbow
with the fuel valve lever in the OFF position
and the choke lever in the CLOSE position.
Before installation, clean the inside of the
air cleaner elbow.
AIR CLEANER ELBOW
AIR CLEANER COLLAR (2)
9 N·m (0.9 kgf·m, 6.6 lbf·ft)
1.2 N·m (0.1 kgf·m, 0.9 lbf·ft)