12
STARTING THE ENGINE
1. Turn the engine switch to the “ON” position.
2. Ensure the choke is in ‘OPEN’ position.
3. Ensure that the Fuel cock is in Stop
(CLOSED) position. Then turn the
drain cock to ‘ON’ and drain the
kerosene from the carburetor into
a container.
4. Turn the drain cock to ‘OFF’ . Return
any removed kerosene from the
carburetor into the kerosene tank.
HOT STARTING
(For WBK 30 & WPK 20)
5. Turn the fuel cock to the ‘START’.
6. Raise the throttle lever slightly.
NOTE : Ensure priming water before
starting.
7. Pull the starter grip lightly until
resistance is felt, then pull briskly.
8. Turn the fuel cock to ‘RUN’ position.
Do not allow the starter grip to
snap back against the pumpset.
Return it gently to prevent damage
to the starter.
NOTICE
OPERATION
