Honda TRX90X, Owner'S Manual

Page: 123 / 221

Servicing Your Honda
114
Engine Oil
3. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 170).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
1. Reinstall the oil drain plug with a new sealing washer, and
tighten it to the specified torque:
24 N·m (2.4 kgf·m , 17 lbf·ft)
2. Fill the crankcase with the recommended grade oil
approximately:
0.7 ℓ (0.7 US qt , 0.6 Imp qt)
3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 – 5 minutes.
5. Stop the engine and check the oil level. Make sure the oil is
between the upper and lower level marks on the oil fill cap/
dipstick. If necessary, add more oil but do not overfill.
6. Check that there are no oil leaks.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
14 TRX90X-32HP26700.book 114 ページ ２０１３年８月５日 月曜日 午後２時２０分