Honda TRUNK NET Installation Instructions Download Page 2

08L96-TEA-7000-90

2 / 5

Introduction of Icons

• These icons indicate the working place and the worker’s vision.

• These icons indicate the necessary things for your safety and the work.

Safety: General

• Observe all safety notes and precautions described in the Shop Manual in addition to those described in this 

Installation Instructions. Be extremely careful for your safety and safety of others particularly.

• Be careful not to damage the vehicle and the parts.

• Be extremely careful to the handling of the retaining tabs and clips particularly.

• The illustrations may differ a little from the actual accessories for the design change of the vehicle.

Safety: For the Accessory

• Always use the parts and tools specified in the installation instructions.

The place for the vehicle.

The place for the instrument panel.

Wear eye protection.

Wear heavy gloves.

Work with an assistant.

Place the part on a blanket.

Remove any burrs.

Use the touch-up paint and dry.

Keep the parts and give it to the customer.
(Not use.)

Press firmly.

Tighten by specified torque.

Work perpendicularly.

Clean with the contact cleaner.

Summary of Contents for TRUNK NET






Reviews: