ALTERNATOR/STARTER CLUTCH
11-9
STARTER DRIVEN GEAR
Check the one-way clutch sprag contact surface,
teeth and sliding surface for wear or damage.
Measure the driven gear O.D.
Measure the driven gear I.D.
STARTER DRIVEN GEAR/STARTER
CLUTCH INSTALLATION
Clean and apply engine oil to the one-way clutch
sliding surface.
Install the one-way clutch into the clutch outer with
its flange side facing the flywheel.
SERVICE LIMIT: 57.73 mm (2.273 in)
SERVICE LIMIT: 37.10 mm (1.461 in)
ONE-WAY CLUTCH
DRIVEN GEAR
CLUTCH OUTER
30 N
·
m (3.1 kgf
·
m, 22 lbf
·
ft)
FLYWHEEL
ONE-WAY CLUTCH
CLUTCH OUTER
