±
±
−
−
−
−
−
−
−
−
Both trip meters will reset if the
vehicle’s battery goes dead or is
disconnected.
This shows the outside Fahrenheit
temperature in U.S. models, and
Centigrade temperature in Canadian
models.
To reset a trip meter, display it, then
press and hold the Select/Reset
button until the number resets to
‘‘0.0.’’
In certain weather conditions,
temperature readings near freezing
(32°F, 0°C) could mean that ice is
forming on the road surface.
If the outside temperature is
incorrectly displayed, you can adjust
it up to
5°F (
3°C) warmer or
cooler.
NOTE: The temperature must be
stabilized before doing this
procedure.
Select the outside temperature
display, then press the Select/Reset
button for 10 seconds. The following
sequence will appear for 1 second
each: 0, 1, 2, 3, 4, 5,
5,
4,
3,
2,
1, 0, 1 (0, 1, 2, 3,
3,
2,
1, 0, 1).
When it reaches the desired value,
release the Select/Reset button. You
should see the new outside
temperature displayed.
The temperature sensor is in the
front bumper. The temperature
reading can be affected by heat
reflection from the road surface,
engine heat, and the exhaust from
surrounding traffic. This can cause
an incorrect temperature reading
when your speed is under
19 mph (30 km/h). When you start
your trip, the sensor is not fully
acclimatized, therefore it may take
several minutes until the proper
temperature is displayed.
Outside Temperature
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
72
SELECT/
RESET
BUTTON
