Honda SPORTRAX 400X, Owner'S Manual

Page: 108 / 248

−
−
7 lbf·ft (10 N·m , 1.0 kgf·m)
1.8 US qt (1.7 )
14 lbf·ft (20 N·m , 2.0 kgf·m)
18 lbf·ft (25 N·m , 2.5 kgf·m)
100
Engine Oil & Filter
Servicing Your Honda
Improper disposal of drained f luids is harmf ul to the environment.
Add Engine Oil:
Reinstall the oil filter cover, making sure the bolts are tightened to the
specified torque:
Pour the drained oil into a suitable container and dispose of it in an
approved manner (page
).
Fill the oil tank with the recommended grade oil approximately:
After the oil has drained, make sure the sealing washers on the drain
bolts are in good condition. If necessary, replace the sealing washers.
Reinstall the oil filler cap/dipstick.
Reinstall the engine guard.
Reinstall the oil filler cap/dipstick.
Check for oil leaks.
If a torque wrench is not used for installation, see your Honda dealer as
soon as possible to verify proper assembly.
Start the engine and let it idle for 3 5 minutes.
Stop the engine and after 2 3 minutes, check the oil level. Make
sure the oil is between the UPPER and LOWER level marks on the oil
filler cap/dipstick. If necessary, add more oil but do not overfill.
Reinstall the drain bolts and tighten to the specified torque:
Engine oil drain bolt (oil tank):
Engine oil drain bolt (crankcase):
1.
2.
3.
4.
5.
4.
5.
6.
7.
8.
9.
168
０８／０９／１７ １４：１０：１１ ３１ＨＮ１７００ ０１０９