Honda SPORTRAX 250X Owner'S Manual Download

Page: 94 / 212

(5)

(3)

(1) seat lock lever
(2) seat
(3) front prongs

(4)

(4) hooks
(5) studs

(2)

(1)

LEFT SIDE

Seat Removal

Servicing Your Honda

Saf ety Precautions

Refer to

on page

Press down on the seat until locks.

Installation

Slide the seat ( ) back and lift it.

Removal

Insert the front prongs ( ) into the hooks ( ) on the frame and press
the studs ( ) into the grommets on the frame.

Pull the seat lock lever ( ) at the left side of the seat.

The seat must be removed for the air cleaner, battery and fuse
maintenance, and to access the tool kit and owner’s manual.

1.
2.

０８／０８／０８１７：４８：２２３２ＨＮ６６６０００９５

Summary of Contents for SPORTRAX 250X





















































































































































































































Search results

Summary of Contents for SPORTRAX 250X

Reviews:

Related manuals for SPORTRAX 250X

Brands by name

Popular brands

Honda SPORTRAX 250X, Owner'S Manual

Search results

Summary of Contents for SPORTRAX 250X

Reviews:

Related manuals for SPORTRAX 250X

Brands by name

Popular brands