6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u
Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install the new oil filter and tighten.
Torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque:
21 lbf·ft (29 N·m, 3.0 kgf·m)
10.
Fill the crankcase with the recommended
oil (
P. 129) and install the oil fill
cap/dipstick.
Required oil
When changing oil & engine oil
filter:
2.7 US qt (2.6 L)
When changing oil only:
2.6 US qt (2.5 L)
11.
Check the oil level.
12.
Check that there are no oil leaks.
20170804181417_31MJA6000_enu_BOOK Page 62 Friday, August 04 2017 18:20:32 JST
Engine Oil
u
Changing Engine Oil & Filter
Maintenance
59
Rubber
seal
Oil filter
