Honda SH300I 2006, Manual

Page: 80 / 511

MAINTENANCE
4-6
Major adjustments are made with the lower
adjuster on the throttle body.
Remove the luggage box (page 3-5).
Loosen the lock nut, turn the adjusting nut as
required and tighten the lock nut.
After adjustment, recheck the throttle operation.
AIR CLEANER
• The viscous paper element type air cleaner can-
not be cleaned because the element contains a
dust adhesive.
• If the scooter is used in unusually wet or dusty
areas, more frequent inspections are required.
Remove the following:
– belt case air cleaner housing (page 4-16)
– seven screws
– air cleaner housing cover
– air cleaner element
Replace the element in accordance with the mainte-
nance schedule (page 4-4) or any time it is exces-
sively dirty or damaged.
Clean the inside of the air cleaner housing and
cover.
Make sure the rubber seals in the housing are in
position and in good condition.
Install a new element and the cover, and tighten the
seven screws.
Install the belt case air cleaner housing (page 4-16).
ADJUSTING NUT
LOCK NUT
SCREWS
COVER
TORQUE: Air cleaner housing cover screw
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)
ELEMENT
RUBBER SEALS