Honda SH300I 2006, Manual

Page: 471 / 511

LIGHTS/METERS/SWITCHES
22-15
OIL PRESSURE INDICATOR
INSPECTION
Indicator does not come on with the ignition switch
turned to "ON"
Check the combination meter initial function (page
22-8).
If the all needles show initial functions but oil pres-
sure indicator does not came on, check the follow-
ing:
Slide the rubber cap, and disconnect the oil pres-
sure switch wire by removing the terminal screw.
Ground the wire terminal.
Turn the ignition switch to "ON" and check the oil
pressure indicator.
• If the indicator comes on, replace the oil pressure
switch.
• If the indicator does not come on, check for loose
an open circuit in the Blue/Red wire. If the wire is
OK, replace the combination meter (page 22-9).
Indicator stays on while the engine is running
Slide the rubber cap, and disconnect the oil pres-
sure switch wire by removing the terminal screw.
Check for continuity between the wire terminal and
ground.
• If there is continuity, check for a short circuit in
the Blue/Red wire.
• If there is no continuity, check the oil pressure
(page 5-5).
If the oil pressure is normal, replace the oil pres-
sure switch.
WIRE
TERMINAL
TERMINAL SCREW
RUBBER CAP
WIRE
TERMINAL
TERMINAL SCREW
RUBBER CAP