Honda SH300I 2006, Manual

Page: 344 / 511

FRONT WHEEL/SUSPENSION/STEERING
15-30
INSTALLATION
• Urea based multi-purpose grease with extreme pressure agent (example: EXCELITE EP2 manufac-
tured by KYODO YUSHI, Japan), Shell Stamina EP2 or equivalent
Apply 3 – 5 g (0.1 – 0.2 oz) of grease (page 15-30) to
each new steering bearing and fill it up. Install the
lower steering bearing onto the stem.
Apply grease to new upper dust seal lip and upper
inner race.
Insert the steering stem into the steering head pipe
and install the following while holding the stem:
– upper steering bearing
– upper inner race
– dust seal
– adjusting nut (and temporarily tighten)
LOWER
BEARING
STEERING STEM
LOCK NUT
UPPER BEARING
UPPER INNER RACE
LOWER
OUTER RACE
LOWER
DUST SEAL
LOWER
INNER RACE
UPPER OUTER RACE
ADJUSTING
NUT
UPPER DUST SEAL
Do not get grease
on the stem
threads.
STEERING STEM
UPPER BEARING
DUST SEAL
LOWER BEARING
UPPER INNER RACE