Honda SH300A-AS Owner'S Manual Download Page 18

Page: 18 / 149

Turn the handlebar fully to the left.

Turning the handlebar to the right

reduces stability and may cause the

scooter to fall.

Turn the ignition switch to the (Lock)

position (

P. 34) and lock the ignition

switch (

P. 41).

Refuelling and Fuel Guidelines

Follow these guidelines to protect the engine,

fuel system and catalytic converter:

●

Use only unleaded petrol.

●

Use recommended octane number. Using

lower octane petrol will result in decreased

engine performance.

●

Do not use fuels containing a high

concentration of alcohol.

P. 134

●

Do not use stale or contaminated petrol or

an oil/petrol mixture.

●

Avoid getting dirt or water in the fuel tank.

20180912132715_32K53L200_eng_BOOK Page 17 Wednesday, September 12 2018 13:33:26 JST

Riding Precautions

Scooter Safety

Left handle grip Grab rail

Centre stand

Summary of Contents for SH300A-AS






















































































































































Search results

Summary of Contents for SH300A-AS

Reviews:

Related manuals for SH300A-AS

Brands by name

Popular brands

Honda SH300A-AS, Owner'S Manual

Search results

Summary of Contents for SH300A-AS

Reviews:

Related manuals for SH300A-AS

Brands by name

Popular brands