background image

If you believe you have a problem with your

scooter, call the service department of your

Honda dealer. Make an appointment for an

inspection and diagnosis. You will be asked to

authorize that inspection, and your dealer will

return the results of the inspection. If a problem

exists and is covered under warranty, your

dealer will perform the warranty repairs. If you

have any questions about your warranty

coverage or the nature of the repair, talk to the

Service Manager of your Honda dealer.

If a misunderstanding occurs and you aren't

satisfied with your dealer's handling of the

situation, we suggest you discuss your problem

with the appropriate member of the

dealership's management team. If you are still

not satisfied, contact the owner of the

dealership or their designated representative.

Honda Contacts

American Honda Motor Co., Inc.

If you wish to contact Honda directly to

comment on your experiences with your

scooter or with your dealer, please send your

comments to the following address:

Motorcycle Division, 

American Honda Motor Co., Inc., 

P.O. Box 2200, Torrance, 

CA 90509-2200

Mailstop: 100-4C-7B, 

Telephone: (866) 784-1870.

Canada

Honda Canada Inc.

Customer Relations Department,

180 Honda Boulevard

Markham, Ontario 

L6C 0H9

Telephone: (888) 946-6329

Fax: (877) 939-0909

E-mail: [email protected]

20171012131102_31GGA6900_enu_BOOK Page 104 Thursday, October 12 2017 13:15:26 JST

Honda Contacts

Information

101

Continued

Summary of Contents for Ruckus NPS50 2018




















































































































Reviews: