Honda RIDGELINE 2017 Owner'S Manual Download Page 575

Page: 575 / 611

573

Han

lin
g the U

expected

Indicator, Coming On/Blinking

If the Low Oil Pressure Indicator Comes On

■

Reasons for the indicator to come on

Comes on when the engine oil pressure is low.

■

What to do as soon as the indicator comes on

Immediately park the vehicle on level ground in a safe place.

If necessary, turn the hazard warning lights on.

■

What to do after parking the vehicle

Stop the engine and let it sit for about three minutes.

Open the hood and check the oil level.

Add oil as necessary.

Oil Check

P. 517

Start the engine and check the low oil pressure indicator.

The indicator goes off: Start driving again.

The indicator does not go out within 10 seconds: Stop the engine
and contact a dealer for repairs immediately.

If the Charging System Indicator Comes On

■

Reasons for the indicator to come on

Comes on when the battery is not being charged.

■

What to do when the indicator comes on

Turn off the climate control system

/heating and cooling system

, rear

defogger, and other electrical systems, and immediately contact a dealer
for repairs.

If the Low Oil Pressure Indicator Comes On

NOTICE

Running the engine with low oil pressure can cause
serious mechanical damage almost immediately.

If the Charging System Indicator Comes On

If you need to stop temporarily, do not turn off the
engine. Restarting the engine may rapidly discharge
the battery.

* Not available on all models

Summary of Contents for RIDGELINE 2017



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands

Honda RIDGELINE 2017, Owner'S Manual

Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands