Honda RIDGELINE 2017 Owner'S Manual Download Page 524

Page: 524 / 611

Maintenance Under the Hood

Engine Coolant

522

Main

tenan

1. Make sure the engine and radiator are

cool.

Remove the engine compartment cover.

Engine Compartment Cover

P. 515

Turn the radiator cap counterclockwise and
relieve any pressure in the cooling system.
Do not push the cap down when turning.

Push down and turn the radiator cap
counterclockwise to remove it.

The coolant level should be up to the base
of the filler neck. Add coolant if it is low.

Put the radiator cap back on, and tighten it
fully.

Pour coolant into the reserve tank until it
reaches the

MAX

mark. Put the cap back

on the reserve tank.

■

Radiator

Radiator

NOTICE

Pour the fluid slowly and carefully so you do not spill
any. Clean up any spills immediately; they can
damage components in the engine compartment.

WARNING

Removing the radiator cap while the
engine is hot can cause the coolant to spray
out, seriously scalding you.

Always let the engine and radiator cool
down before removing the radiator cap.

Radiator
Cap

Summary of Contents for RIDGELINE 2017



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands

Honda RIDGELINE 2017, Owner'S Manual

Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands