Honda RIDGELINE 2017 Owner'S Manual Download Page 187

Page: 187 / 611

Continued

185

Interior Lights/Convenience Items

In-Bed Convenience Items

Co
ntrols

■

ON and OFF

Press the AC power outlet button to turn the
system on and off.

The indicator in the button comes on
when the system is on.

400W

(Amber) mode is:

•

When the engine running and the shift
lever in

(

150W

(Green) mode is:

•

When the power mode is in ACCESSORY or
ON.

•

When the engine running and the shift
lever out of

(

•

When the truck bed audio system is
activated.

AC Power Outlet

The protection circuit may be activated to cut the
power supply if any of the following conditions apply:

•

The engine is started when the power outlet switch
on.

•

An electrical appliance exceeding the maximum
capacity is used.

•

The total power consumed by the electrical
features (head lights, air conditioning, etc.),
including the truck bed audio

, has exceeded the

maximum vehicle wattage capacity for a prolonged
period of time.

Indicator

* Not available on all models

Summary of Contents for RIDGELINE 2017



































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands

Honda RIDGELINE 2017, Owner'S Manual

Search results

Summary of Contents for RIDGELINE 2017

Reviews:

Related manuals for RIDGELINE 2017

Brands by name

Popular brands