Lights
Replacing a Rear License
Bulb
1. Remove the two screws and
remove the license light assem-
bly.
2. Remove the lens from the rubber
seal and the metal cover.
3. Pull the bulb straight out of its
socket. Push the new bulb in
until it bottoms in the socket.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the cover and the lens.
Put the license light assembly in
place. Reinstall the two screws
and tighten them securely.
Replacing Interior and Trunk
Light Bulbs
1. Remove the lens by carefully
prying on the edge of the lens in
the middle with a fingernail file
or a small flat-tip screwdriver.
Do not pry on the edge of the
housing around the lens.
CONTINUED
Maintenance
INTERIOR LIGHT
Main Menu
Table of Contents
▲
▼
