Cruise Mode Selected appears in the
driver information interface for two
seconds, and then the mode switches
to Cruise.. Press and hold the interval
button again to switch back to ACC .
ACC Mode Selected appears on the
driver information interface display for
two seconds.
Lane Keeping Assist System (LKAS)
Provides steering input to help keep the vehicle in the middle of a detected lane
and provides audible and visual alerts if the vehicle is detected drifting out of its
lane while driving between 45–90 mph (72–145 km/h).
DRIVING
112 |
n
Turning the System On or Off
1. Press the MAIN button. LKAS appears
in the driver information interface.
2. Press the LKAS button. Lane outlines
appear in the driver information
interface. Dotted lane lines turn solid
when the system activates.
3. Press the MAIN button or the LKAS
button to turn the system off.
n
Important Safety Reminder
LKAS is for your convenience only. It is not a substitute for your vehicle
control. The system does not work if you take your hands off the steering
wheel or fail to steer the vehicle.
Do not place an object on the top of the instrument panel. It may reflect onto
the windshield and prevent the system from detecting lane lines properly.
Road Departure Mitigation (RDM)
Alerts and helps to assist you if the system
determines a possibility of your vehicle
unintentionally crossing over detected lane
markings and/or leaving the roadway
altogether while driving between 45-90 mph
(72-145km/h).
If your vehicle is getting too close to
detected lane markings without a turn
signal activated, the system, in addition to a
visual alert, applies steering torque and
alerts you with rapid vibrations on the
steering wheel, to help you remain within
the detected lane. Braking is applied only
when the lane markings are solid
continuous lines.
DRIVING
| 113