Honda PCX150, Owner'S Manual

Page: 199 / 306

the tool kit to the EM mode connector.
(
P.1 19
)
u
The Honda SMART Key indicator and
ignition switch ring go off.
e
Push the ignition switch 1 time.
f
Repeat this step 3 times as follows:
Press the alarm button on the Honda
SMART Key 2 times and the ignition
switch 1 time.
u
When the alarm button is pressed, the
LED on the Honda SMART Key comes
on. Make sure the LED went off before
the next button pressing.
u
If the alarm button or ignition switch is
not pressed for 1 minute, the Honda
SMART Key indicator starts blinking and
this mode will be cancelled. If so, remove
the EM mode coupler, return to
c
and
follow the procedure again.
20180912083000_32K97Q000_eng_BOOK Page 47 Wednesday, September 12 2018 08:36:26 JST
Operation Guide
4 2
Anti-theft Alarm System
(Continued)
#
Adjusting the Sensitivity of Anti-theft
Alarm System
You can select from 3 sensitivity levels for the
anti-theft alarm system.
a
Make sure that the Honda SMART Key
system is activated.
(
P.3 1
)
b
Remove the battery cover.
(
P.8 3
)
c
Push the ignition switch to authenticate the
Honda SMART Key system.
(
P.3 1
)
d
Connect the EM mode coupler provided in
Alarm button
Ignition switch
Ignition switch ring