© 2003 American Honda Motor Co., Inc - All Rights Reserved.
3 of 5
6.
Install the left and right audio bracket.
With Cassette Player:
•
Set the audio unit on the Cassette player and
attach the left and right audio brackets using
the four washer-screws removed in step 5 to
the audio unit.
•
Attach the left and right audio brackets using
the four 5 x 8 mm washer-screws included in
the Cassette player to the Cassette player.
With In-Dash CD Changer:
•
Attach one adhesive strip to the bottom of the
In-Dash CD changer.
•
Set the audio unit on the In-Dash CD changer
and attach the left and right audio brackets
using the four washer-screws removed in step
5 to the audio unit.
•
Attach the left and right audio brackets using
the four 5 x 8 mm washer-screws included in
the In-Dash CD changer to the In-Dash CD
changer.
2625080K
5 x 8 mm
WASHER-
SCREW
(Included in
the Cassette
player.)
AUDIO UNIT
RIGHT
BRACKET
CASSETTE
PLAYER
LEFT
BRACKET
5 x 8 mm
WASHER-SCREW
(Included in the
Cassette player.)
WASHER-
SCREW
(Removed
in step 5.)
WASHER-
SCREW
(Removed
in step 5.)
Use the
lower hole.
Use the
middle hole.
ADHESIVE STRIP
Clean the In-Dash CD changer
with isopropyl alcohol before
attaching the spacer.
Bottom of the
In-Dash CD
changer
2625090K
5 x 8 mm
WASHER-
SCREW
(Included in
the In-Dash
CD changer.)
AUDIO UNIT
WASHER-
SCREW
(Removed
in step 5.)
RIGHT
BRACKET
In-Dash CD
CHANGER
LEFT AUDIO
BRACKET
5 x 8 mm WASHER-SCREW
(Included in the In-Dash CD
changer.)
WASHER-SCREW
(Removed in step 5.)
Use the
lower hole.
Use the
middle hole.
HARNESS CLIP
(Included in
Cassette player.)
5 x 8 mm WASHER-SCREW
(Included in Cassette player.)
BUS CABLE
CONNECTOR
AUDIO
UNIT
CASSETTE
PLAYER
7.
Attach the harness clip to the back of the player
or In-Dash CD changer using the 5 x 8 mm
washer-screw or 4 x 6 mm washer-screw. Plug
the BUS cable connector into the audio unit.
8.
Bundle up the excess BUS cable and secure it to
the player or In-Dash CD changer with the
harness clip.
With Cassette Player
