Honda NC700 2012, Service Manual

Page: 702 / 773

20-21
dummyhead dummyhead
ANTI-LOCK BRAKE SYSTEM (ABS)
4. Failure Reproduction
Connect the ABS modulator 25P connector.
Erase the problem code (page 20-9).
Test ride the motorcycle above 30 km/h (18 mph).
Retrieve the problem code (page 20-8) and recheck
the ABS indicator [1].
Does the ABS indicator indicate the code "51, 52
or 53"?
YES – Faulty ABS modulator
NO – Pump motor is normal (intermittent failure).
PROBLEM CODE 54 (Fail-safe Relay)
1. Fuse Inspection
Check the ABS fuse 30 A (ABS SOL.) [1] in the fuse
box for blown.
Is the fuse blown?
YES – GO TO STEP 2.
NO – GO TO STEP 3.
2. Relay Power Input Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector [1].
Check for continuity between the ABS modulator
25P connector of the wire harness side and ground.
Is there continuity?
YES – Short circuit in Black/white wire
NO – Intermittent failure. Replace the ABS fuse
30 A (ABS SOL.) with a new one, and
recheck.
[1]
[1] NC700XA/SA shown:
Connection: Black/white – Ground
TOOL:
Test probe
07ZAJ-RDJA110
Bl/W
[1]